![]() ![]() EMBC02 is FCC, IC, and CE certified, RoHS, Reach, and halogen free compliant. Gestures include: any movement, no movement, taps, falls, and shocks. Custom parameters include UID, power level, beacon interval, state-machine, gesture alarm mode, gesture threshold, and accelerometer data and settings. RBT-007 firmware can be customized for individual deployments with the Proximity Beacon Development Kit. A unique serial number is printed on the label and encoded in a QR code for optical scanning. The device only beacons after a fall has occurred and 10 minutes after the event x Any mode can be locked for final deployment RBT-007 can be delivered in any quantity with guaranteed unique ID numbers. The device only beacons when movement is detected and one minute after the device is still Fall Mode offers 100ms beacon interval, 120m range, and consumes an average of 350 A when beaconing and 13 A while idling. x Moving Mode offers 100ms beacon interval, 30m range, and consumes an average of 275 A when beaconing and 6 A while idling. X x Sleep Mode with over 7 years of shelf life typical Sensor Mode offers 1s beacon interval, 60m range line-of-sight (LOS), and 4.5 months of battery life typical while displaying raw accelerometer data and a tap counter. EMBC02 is shipped pre-programmed with several operating modes: operating modes offer tradeoffs between RBT-007 different functional modes. A push-button with LED feedback allows the user to select the right operating mode for their deployment. advertises ID data that is RBT-007 is part of the coin-cell family of Similar to beacons which come in a small, weatherproof enclosure, using a standard coin-cell battery, or as a PCB panel. There is also a mode to display accelerometer data and gesture counts. ![]() compatible with common beacon standards (UUID, Major ID, and Minor ID), ONLY when an object is moving, or ONLY after an object has fallen. If you still aren't seeing the beacon then something maybe wrong with Bluetooth on your device and you can try clearing it's cache by turning Bluetooth off and then again.Tall Tent RONGMAI RBT-007 General Description Features RBT-007 is a Bluetooth Low-Energy proximity beacon RBT-007 with integrated accelerometer for attachment to objects that move. When you scan for the beacon, you should see it. For RadBeacon usb, remove power and restore power. If you are not seeing the RadBeacons in the app when you scan, the beacon is probably not in config mode anymore. On restart the problem should be corrected. If that doesn't fix it, try resetting your phone by holding down the sleep/wake button and the home button until the phone powers off. You should try turning off Bluetooth and then turning it back on again. Apple is aware of the problem and promising a fix. If you've cycled power to your beacon and are still unable to recognize it using the RadBeacon Config App, you may be experiencing the results of an iOS bug that affects proximity ranging. Re-initiating Configurable ModeĬonfigurable mode can be re-initiated for RadBeacon USB beacons by removing and restoring power to the device. If you are using the RadBeacon Config App to detect and configure your beacons, and are unable to recognize or access your beacons, it is likely that this configuration window has lapsed. Once your RadBeacon USB has been plugged in, or your RadBeacon Tag has been activated, the beacon will broadcast in configurable mode for an initial window of 30 minutes. You can scan for beacons by pulling down on the table view in the RadBeacon Configuration App.Äownload the RadBeacon Config App for your device.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |